ASSEMBLY OF HIGH VOLTAGE CONNECTORS
In combination with our connectors and cables, we can provide a high quality assembly service of our high voltage cables and connectors. Our longstanding partners in Germany provides this assembly service in accordance with ISO 9002 directives.
The assembly of a high voltage connector with a high voltage cable is a rather difficult step which must be accomplished with expertise and thoroughness. If this task is not carried out correctly, the risk is to have air layers on the “conductor / dielectric” interface that may cause partial discharges and premature wear of the dielectrics in the components.
Another challenge is to crimp, with the greatest care, the shield (ground braid) of the high voltage cable to the connector to avoid the air layers on the interfaces. In AC alternative mode partial discharges can possibly occur, thus reducing the longevity of the dielectrics. This demonstrates once more the importance of the quality assembly of the high voltage connector with the high voltage cable.
CATALOG: Find the latest news on high voltage connectors and cables of HIVOLT
EXCLUSIVE : In the factory, for the assembly of the high voltage connector with the high voltage cable the voltage is systematically tested in order to ensure a very high quality level.
ASSEMBLY OF HIGH VOLTAGE CONNECTORS
- High voltage connector assembly up to 100 kV DC
- Operating voltage up to 100 kV DC
- Different connector models and a large number of cable types
- Endings option on one end or both ends
- Endings possible on both sides with identical or different connector models.
- Receptacles for mounting on instruments (chassis, mechanical, etc.) available in oil-tight or hermetic versions
- Specific references resistant to wide temperature ranges
- High voltage connector and cable assembly fully factory tested to provide reliable and long lasting connections
APPLICATIONS OF ASSEMBLIES WITH HIGH VOLTAGE CONNECTORS
- power supplies
- high voltage instrument connections
- testing and measuring devices
- wiring in laboratories
- nuclear instrumentation
- industrial and scientific x-rays
- electron microscopes
- mass spectrometry
- particle physics
- analytical instruments
- medical electronics
- high voltage test equipment
- electron beam welding
And many more…
57 SHV SERIES
SHV HIGH VOLTAGE CONNECTOR ASSEMBLY (PLUG & SOCKET 5 kV)
Safe High Voltage – Nuclear Instrumentation Module Standard
Secure high voltage connector up to 5 kV DC to be mounted on a large number of type RG 58 cables to choose from. There are “high temperature” versions available. The cables with SHV endings are used in nuclear instrumentation and many other applications. Both the connectors and the socket / receptacle have built-in contacts and withstand nominal voltage when in the non-wired state.
HC51 SHV10 SERIES
SHV HIGH VOLTAGE CONNECTOR ASSEMBLY (PLUG & SOCKET 10 kV)
It is a high voltage connector up to 10 kV DC to be mounted on a variety of RG 58 type cables. There are “high temperature” versions of the cable available. The classic applications include the industrial, nuclear and medical instrumentation. The onnectors as well as the socket / receptacle have built-in contacts and withstand nominal voltage in non-wired state.
HC52 SHV20 SERIES
SHV HIGH VOLTAGE CONNECTOR ASSEMBLY (PLUG & SOCKET 20 kV)
This is a high voltage coaxial connector up to 20 kV DC to crimp on a wide range of cables of the types RG 213 / RG 214. The classic applications include industrial, nuclear and medical instrumentation. Both the connectors and the sockets (receptacles) have built-in contacts and resist rated voltage in a non-wired state.
SINGLE POLE HIGH VOLTAGE CONNECTOR ASSEMBLY 10kV – 100kV
Crimping of high voltage industrial connectors for voltages of 10 kV, 20 kV, 30 kV, 50 kV, 60 kV and 100 kV DC. They adapt to cables with diameters of 6.5 to 14 mm (outside diameter). Different types of cables are available for different requirements. For industrial and scientific applications of medium and high powers.
HS / HB SERIES
SINGLE POLE HIGH VOLTAGE CONNECTOR ASSEMBLY 10/20/30/40 kV
A high voltage connector of 10 kV, 20 kV, 30 kV and 40 kV DC to crimp on cables with outside diameters from 5 to 6.5 mm. There are different types of cables available to cover numerous needs. For industrial and scientific applications from low to medium power.
SB100 SERIES [DISCONTINUED – SEE HC7 SERIES]
SINGLE POLE HIGH VOLTAGE CONNECTOR ASSEMBLY 10 kV – 100 kV
A high voltage connector for 10 kV, 20 kV, 30 kV, 50 kV, 60 kV and 100 kVDC to be mounted on cables with outside diameters from 7 to 14 mm. There are various types of cables available for different requirements. For industrial and scientific applications of medium and high powers.
1/2/3 POLE HIGH VOLTAGE CONNECTOR ASSEMBLY 13 kV – 13 A
Series of 1, 2 or 3 pole connectors for internal wiring up to 13 kV DC. The diameters to be used here arefrom AWG26 to AWG14.